Index to this catalog:

Library of Iron and Steel

Metals Handbooks

Metallography: The Structure, Composition and Chemistry of Metals

Metal Structural Design and Manufacturing

Metallurgy

Miscellaneous Metal Books

Plastics / Polymers

Numerical book descriptions to better describe the books in this catalog:

- 1 - An absolutely clean book; in mint condition; book was received directly from the publisher
- 2 - Clean book with no markings, folds, chips, stamps, but may show slight wear
- 3 - Used book which shows slight wear or has one stamping, signature, or other slight markings
- 4 - Used book has more wear, several stamps, marks, signatures, or some underlining
- 5 - An x-library book which may contain library stamps, scars from removal of card pockets, etc.

A classification of - 5 - does not mean that this is a book in poor condition. We do not stock books in poor quality or in bad condition. Books with tears, water damage, etc. are almost never stocked by this MS Book and Mineral Company. A book with the classification of - 4 - has a major redeeming feature to find its way into this catalog. Some of our x-library books appear to have never been checked out. This numbering system is designed to give you a more complete, fast, but accurate, description of our books.

Library of Iron and Steel

Volume 1 / Stroughton, B. / THE METALLURGY OF IRON AND STEEL, 2nd Edition, New York, 1913, cl, 537 pages; Volume 2 / Hall, J. H. / THE STEEL FOUNDRY, 1st Edition, New York, 1914, cl, 271 pages; Volume 3 / Moldenke, R. / THE PRINCIPLES OF IRON FOUNDING, 1st Edition, New York, 1917, cl, 517 pages; Volume 4 / Johnson, J. E., Jr. / BLAST-FURNACE CONSTRUCTION IN AMERICA, 1st Edition, New York, 1917, cl, 415 pages; Volume 5 / Johnson, J. E., Jr. / THE PRINCIPLES, OPERATION AND PRODUCTS OF THE BLAST FURNACE, 1st Edition, 1918, cl, 551 pages; Volume 6 / Richards, J. W. / METALLURGICAL CALCULATIONS IN TWO PARTS, PART I - Chemical and Thermal Principles, PART II - Applications to the Metallurgy of Iron and Steel, 1st Edition, New York, 1918, cl, 476 pages; Volume 7 / Havard, F. T. / REFRACTORIES AND FURNACES: PROPERTIES, PREPARATION, AND APPLICATION OF MATERIALS USED IN THE CONSTRUCTION AND OPERATION OF FURNACES, 1st Edition, New York, 1912, 356 pages, all 7 volumes clean and unmarked, - 2 -, $ 250 for the set

Metals Handbooks, 8th Edition

Archer, R. S., Briggs, J. Z., and Loeb, C. M., Jr. / MOLYBDENUM: STEELS, IRONS, ALLOYS, New York, 1948, cl, 391 pages, - 3 -, $ 35 [produced by the Climax Molybdenum Company]

Chalmers, B. / PHYSICAL METALLURGY, New York, 1959, cl, 468 pages, - 3 -, $ 28

Clough, W. R., Ed. / REACTIVE METALS, New York, cl, 1959, 610 pages, - 3 -, $ 60

Darken, L. S. and Gurry, R. W. / PHYSICAL CHEMISTRY OF METALS, New York, 1953, cl, 535 pages, - 5 -, $ 30

Dowdell, R. L., Jerabek, H. S., Forsyth, A. C., and Green, C. H. / GENERAL METALLOGRAPHY, New York, 1943, cl, 292 pages, - 4 -, $ 25

Lorig, C. H. and Adams, R. R. / COPPER AS AN ALLOYING ELEMENT IN STEEL AND CAST IRON, New York, 1948, cl, 213 pages, - 3 -, $ 40

Petzow, G. / METALOGRAPHIC ETCHING: Metallographic and Ceramographic Methods for Revealing Microstructure, Metals Park, 1978, cl, 131 pages, - 3 -, $ 25

Pulsifer, H. B. / INSPECTION OF METALS, Cleveland, 1942, cl, 253 pages, - 3 -, $ 30

Weber, J. N., Ed. / GEOCHEMISTRY OF GERMANIUM, Stroudsburg, 1973, cl, 466 pages, - 1 -, $ 45

Metal Structural Design and Manufacturing

Begemajn, M. L. and Amstead, B. H. / MANUFACTURING PROCESSES, 6^th Edition, New York, 1969, cl, 754 pages, - 2 -, $ 30

Deutschman, A. D. / MACHINE DESIGN: Theory and Practice, New York, 1975, cl, 932 pages, - 5 -, $ 65

Hoffman, E. G., Ed. / FUNDAMENTALS OF TOOL DESIGN, 2^nd Ed., Dearborn, 1962, cl, 720 pages, - 2 -, $ 65

Jones, F. D., Ed. / INGENIOUS MECHANISMS FOR DESIGNERS AND INVENTORS, Volume 1, New York, 1957, cl, 536 pages, - 3 -, $ 28

Lindberg, R. A. / MATERIALS AND MANUFACTURING TECHNOLOGY, Boston, 1968, cl, 658 pages, - 2 -, $ 35

Lord, J. O. / ALLOY SYSTEMS: AN INTRODUCTORY TEXT, New York, 1949, cl, 380 pages, - 3 -, $ 40

Metallurgy

Anderson, J. N. and Queneau, P. E. / PYROMETALLURGICAL PROCESS IN NONFERROUS METALLURGY, Based on a 1965 symposium of AIME, Volume 39 of a Metallurgical Society Conference Series, New York, 1967, cl, 517 pages, - 3 -, $ 50

Anonymous / FIRST HELPER’S MANUAL [OPEN-HEARTH FURNACE], Cleveland, 1956, cl, 84 pages, - 3 -, $ 20

Bain, E. C. / FUNCTIONS OF THE ALLOYING ELEMENTS IN STEEL, Pittsburgh, 1958, cl, 312 pages, -3 -, $ 38

Butts, A / A TEXTBOOK OF METALLURGICAL PROBLEMS, 1st Edition, New York, 1932, cl, 425 pages, - 3 -, $ 30

Butts, A. METALLURGICAL PROBLEMS, New York, 1943, cl, 443 pages, - 3 -, $ 45 [includes an answer key to problems in text]

Camp, J. M. and Francis, C. B. / THE MAKING, SHAPING AND TREATING OF STEEL, Pittsburgh, 1925, cl, 1141 pages, gold lead on front board, spine and page edges, wear to page edges and boards, ovg, - 3 -, $ 28

Ford Motor Company / METALLURGY AND METALLOGRAPHY, Ford Apprentice School, Dearborn, 1939, pb, book is divided into sections: elementary chemistry, physics, non-ferrous metallurgy, metallurgy and metallography of iron and steel, - 3 -, $ 28

Grosvenar, A. W., Ed. / BASIC METALLURGY, Volume I - Principles, Cleveland, 1954, cl, 697 pages, - 3 -, $ 55

Guy, A. G. / ELEMENTS OF PHYSICAL METALLURGY, Reading, 1959, cl, 528 pages, - 3 -, $ 32

Guy, A. G. / ELEMENTS OF PHYSICAL METALLURGY, 3^rd Ed., Reading, 1974, cl, 618 pages, - 3 -, $ 60

Guy, A. G. / PHYSICAL METALLURGY FOR ENGINEERS, Reading, 1962, cl, 374 pages, - 3 -, $ 25

Hauser, H. H. / POWDER METALLURGY, Brooklyn, 1947, cl, 305 pages, - 3 -, $ 30

Hofman, H. O. / GENERAL METALLURGY, New York, 1913, cl, 909 pages, - 3 -, $ 35

Hurd, P. S. / METALLIC MATERIALS: An Introduction to Metallurgy, New York, 1968, cl, 381 pages, - 3 -, $ 45

Johnson, C. G. and Weeks, W. R. / METALLURGY, Chicago, 1977, cl, 472 pages, - 2 -, $ 40

Mathewson, C. H. / ZINC: THE SCIENCE AND TECHNOLOGY OF THE METAL, ITS ALLOYS AND COMPOUNDS, New York, 1970, UMI out of print books on demand copy, pb, 721 pages, - 2 -, $ 50

Mehl, R. F., Ed. / THE PRINICPLES OF METALLOGRAPHIC LABORATORY PRACTICE, New York, 1943, cl, 453 pages, - 3 -, $ 25

Powder Metallurgy Equipment Association / POWDER METALLURGY EQUIPMENT MANUAL, Princeton, 1977, cl, 161 pages, - 3 -, $ 40

Richard, J.W. / METALLURGICAL CALCULATIONS, Part I. Introduction, Chemical and Thermal Principles, Problems in Combustions, 2nd Edition, Revised and Corrected, New York, 1908, cl, 208 pages, - 3 -, $ 25

Richards, J. / METALLURGICAL CALCULATIONS PART III. The Metals other than Iron, 2nd Edition, New York, 1917, cl, pages 443 - 641, - 3 -, $ 25

Rosenholtz, J. L. / THE ELEMENTS OF FERROUS METALLURGY, New York, 1930, cl, 248 pages, - 5 -, $ 35

Stroughton, B., Butts, A., and Bounds, A. M. / ENGINEERING METALLURGY: A Textbook for users of Metals, New York, 1953, cl, 479 pages, - 3 -, $ 25 

Sully, A. H. and Brandes, E. A. / CHROMIUM, 2^nd Edition, Metallurgy of the Rarer Metals, No. 1, New York, 1967, cl, 373 pages, - 2 -, $ 50

Ziman, J. M. / PRINCIPLES OF THE THEORY OF SOLIDS, Cambridge, 1964, cl, 360 pages, - 3 -, $ 16

 Miscellaneous Metals Books

Becket, C. A., Ed. / MODERN USES OF NONFERROUS METALS, edited by C. H. Mathewson, 1st Edition, New York, 1935, cl, 427 pages, - 3 -, $ 26

Bosolo, F. and Johnson, R. C. / COORDINATION CHEMISTRY: The Chemistry of Metal Complexes, New York, 1964, cl, 180 pages, - 3 -, $ 15

Fink, F. W. and Boyd, W. K. / THE CORROSION OF METALS IN MARINE ENVIRONMENTS, Columbus, 1970, cl, 87 pages, appendix, - 5 -, $ 30

Hampel, C. A., Ed. / RARE METALS HANDBOOK, New York, 1954, cl, 657 pages, - 3 -, $ 36

Hannel, E. / REPORT OF THE COMMISSION APPOINTED TO INVESTIGATE THE DIFFERENT ELECTRO-THERMIC PROCESSES FOR THE SMELTING OF IRON ORES AND THE MAKING OF STEEL IN OPERATION IN EUROPE, Ottawa, 1904, cl, 223 pages, -3 -, $ 20

Hofman, H. O. / GENERAL METALLURGY, 1st Edition, New York, 1913, cl, 909 pages, - 3 -, $ 10

Marzke, O. T. / IMPURITIES AND IMPERFECTIONS, Cleveland, 1955, cl, 231 pages, - 2 -, $ 35

Richman, M. H. / AN INTRODUCTION TO THE SCIENCE OF METALS, Waltham, 1967, cl, 400 pages, - 3 -, slight foxing throughout, $ 25

Plastics Books

Imam, S. H., et.al., Ed. / BIOPOLYMERS: Utilizing Nature’s Advanced Materials, ACS Symposium Series 723, Washington, D. C., 1997, cl, 305 pages, - 5 -, $ 55

Schwartz, S. S. and Goodman, S. H. / PLASTICS MATERIALS AND PROCESSES, New York, 1982, cl, 965 pages, - 3 -, $ 65